# Shop Talk
Sort order
This is a general channel to chat about whatever you want!ย I'm planning on adding interesting stuff I find each week that would normally go into my newsletter as round ups for you to check out.
Hello,ย
I am looking to engrave food on the fly (if possible) quickly.ย any suggestions on where to start?
Joeย
I am looking to engrave food on the fly (if possible) quickly.ย any suggestions on where to start?
Joeย
Hi Richard, im pretty sure that i had the right licence, but i followed the the process down a different path and i managed to sort it all out. if i could remember what i had done i would post it!!. but im good to go now however i couldn't pick up a design on my home pc that i did on my work pc. which i am investigating today. probably just not quite saved right.
· 2 replies
I wanted to know if anyone has had issues logging back in to Fusion after the change over. it just keeps coming up with "Term has Expired" and there is a box at the side saying "Expired : BUY NOW". in n Orange box at the top right next ot the login circle.
Ive tried following the link on the job status.ย
Does anyone know how to resolve this/what i am i doing wrong!!
Thanks Andrew
Ive tried following the link on the job status.ย
Does anyone know how to resolve this/what i am i doing wrong!!
Thanks Andrew
I just wrapped up a Halloween ๐ inspired project that recreates the plaque from the Haunted Mansion at Disney.ย The 3D model was taken from actual photos at the park from a few years back.
I don't get deep into the Fusion side of things in the build video but I'm currently editing the full tutorial on how I did all the tool paths and it should be out early next week!
Let me know what questions you've got about it.
I don't get deep into the Fusion side of things in the build video but I'm currently editing the full tutorial on how I did all the tool paths and it should be out early next week!
Let me know what questions you've got about it.
I just put out a video walking through all the changes to free plan of Fusion 360 and how they will affect people using Fusion for furniture design.
Also the full write up is here.
Bottom line is you shouldn't see much difference if you aren't really trying to crank out product on the manufacturing side.ย For general modeling pretty much everything is staying the same.
Also the full write up is here.
Bottom line is you shouldn't see much difference if you aren't really trying to crank out product on the manufacturing side.ย For general modeling pretty much everything is staying the same.
So there has been a lot of discussion around the new changes to Fusion.ย I wanted to a wait a little bit for the dust to settle and see what was going on.
I'm planning on doing a video about it later this week but for the most part everything that we do in all my courses will stay mostly the same.ย You might run into the 10 active project limit but you can still have unlimited archived projects. ย You'll just have to switch them on and off.
The big hit for anyone doing 3D printing was going to be export in STEP format.ย Just a few days ago they announced that that was coming back.
Lars Christenson who is on the team at Fusion and one of the best teachers on YouTube just put a great video walking through the changes as well as interviewing the VP of Fusion at Autodesk.
My big takeaway is they still do value the maker hobby market, they are just not wanting people to take advantage of it and make real money off the program.ย If you in that boat then a paid license should make sense.
Let me know what questions you all have, I want to make sure I address it in the upcoming video.
I'm planning on doing a video about it later this week but for the most part everything that we do in all my courses will stay mostly the same.ย You might run into the 10 active project limit but you can still have unlimited archived projects. ย You'll just have to switch them on and off.
The big hit for anyone doing 3D printing was going to be export in STEP format.ย Just a few days ago they announced that that was coming back.
Lars Christenson who is on the team at Fusion and one of the best teachers on YouTube just put a great video walking through the changes as well as interviewing the VP of Fusion at Autodesk.
My big takeaway is they still do value the maker hobby market, they are just not wanting people to take advantage of it and make real money off the program.ย If you in that boat then a paid license should make sense.
Let me know what questions you all have, I want to make sure I address it in the upcoming video.
Hey everybody!ย What's everybody working on this weekend?ย Post any pictures or just drop a comment on the project that you've got.
I'm working on a folding table that is removable and attaches to the outside of my Mom's RV, the engraving is the name of her RV. Is there a good way to do text engraving in Fusion or should I just keep using Easel for simple carves like this?
· 1 reply
Also someone asked for a sign for their toxic plants so we came up with these designs, one may look a little familiar.
· 1 reply
I know for most of us most of us your shop time is over the weekend.ย What is everybody working on?
It's not a very fun project but I need to make some progress on replacing our stair railing. When we moved in we replaced the stair and 2nd story floors with a dark vinyl plank which didn't match the old light colored railing so I decided to replace all of it make it a bit more modern.ย
Here are some photos of the landing that I did a few months ago.ย
Here are some photos of the landing that I did a few months ago.ย
Hopefully I'll also be able to hang some old kitchen cabinets I bought off FB marketplace a few weeks ago in the garage too. I desperately need the storage.ย
· 3 replies